Dell PowerConnect J-EX4200-24T Software Manual page 2309

Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
Table 287: show pim statistics Output Fields (continued)
Field Name
Hello dropped on neighbor
policy
Unknown type
V1 Unknown type
Unknown Version
Neighbor unknown
Bad Length
Bad Checksum
Bad Receive If
Rx Bad Data
Rx Intf disabled
Rx V1 Require V2
Rx V2 Require V1
Rx Register not RP
Rx Register no route
Rx Register no decap if
Null Register Timeout
RP Filtered Source
Field Description
Number of hello packets dropped because of a configured neighbor
policy.
Number of PIM control packets received with an unknown type.
Number of PIM version 1 control packets received with an unknown
type.
Number of PIM control packets received with an unknown version.
The version is not version 1 or version 2.
Number of PIM control packets received (excluding PIM hello)
without first receiving the hello packet.
Number of PIM control packets received for which the packet size
does not match the PIM length field in the packet.
Number of PIM control packets received for which the calculated
checksum does not match the checksum field in the packet.
Number of PIM control packets received on an interface that does
not have PIM configured.
Number of PIM control packets received that contain data for TCP.
Bad register packets.
Number of PIM control packets received on an interface that has
PIM disabled.
Number of PIM version 1 control packets received on an interface
configured for PIM version 2.
Number of PIM version 2 control packets received on an interface
configured for PIM version 1.
Number of PIM register packets received when the router is not the
RP for the group.
Number of PIM register packets received when the RP does not
have a unicast route back to source.
Number of PIM register packets received when the RP does not
have a de-encapsulation interface.
Number of NULL register timeout packets.
Number of PIM packets received when the router has a source
address filter configured for the RP.
2237