Static - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

static

Syntax
Hierarchy Level
Release Information
Description
1708
static {
defaults {
static-options;
}
rib-group group-name;
route destination-prefix {
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
local-address ip-address;
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
minimum-receive-ttl number;
multiplier number;
neighbor address;
no-adaptation;
transmit-interval {
threshold milliseconds;
minimum-interval milliseconds;
}
version (1 | automatic);
}
next-hop address;
next-hop options;
qualified-next-hop address {
metric metric;
preference preference;
}
static-options;
}
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options rib routing-table-name],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options],
[edit routing-options rib routing-table-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure static routes to be installed in the routing table. You can specify any number
of routes within a single
static
options in the configuration.
statement, and you can specify any number of
static