Dell PowerConnect J-EX4200-24T Software Manual page 1846

J series; j-ex series

Hide thumbs

Table of Contents

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

Output Fields

Table 203: show (ospf | ospf3) interface Output Fields

Field Description

Name of the interface running OSPF version 2 or OSPF version 3.

State of the interface:

Number of the area that the interface is in.

Address of the area's designated router.

Backup designated router for a particular subnet.

Number of neighbors on this interface.

Type of interface:

IP address of the neighbor.

Netmask of the neighbor.

(OSPFv3) IPv6 prefix length, in bits.

Prefix-length

(OSPFv3) OSPF version 3 interface index.

OSPF3-Intf-Index

Interface's maximum transmission unit (MTU).

Interface's cost (metric).

Address of the designated router.

Address of the backup designated router.

Number of adjacent neighbors.

Indicates that this interface is configured as a secondary interface for this area.

This interface can belong to more than one area, but can be designated as a

primary interface only for one area.

Flood Reduction

Indicates that this interface is configured with flooding reduction. All

self-originated LSAs from this interface are initially sent with the

set. As a result, LSAs are refreshed only when a change occurs.

Router priority used in designated router (DR) election on this interface.

List of link-state advertisements (LSAs) that might be about to flood this

Table 203 on page 1774 lists the output fields for the

Output fields are listed in the approximate order in which they appear.

show (ospf | ospf3) interface

Level of Output

detail extensive

detail extensive

Chapters

Table of Contents

Troubleshooting

Dell PowerConnect J-EX4200-24T Software Manual page 1846

Chapters

Troubleshooting

Related Manuals for Dell PowerConnect J-EX4200-24T

Related Products for Dell PowerConnect J-EX4200-24T

This manual is also suitable for:

Table of Contents