Dell PowerConnect J-EX4200-24T Software Manual page 2080

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Output Fields
show route resolution show route resolution
detail detail
2008
Table 251 on page 2008 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 251: show route resolution Output Fields
Field Name Field Description
routing-table-name Name of the routing table whose prefixes are resolved using the entries in the
route resolution database. For routing table groups, this is the name of the
primary routing table whose prefixes are resolved using the entries in the route
resolution database.
Tree index identifier.
Tree index
Nodes Number of nodes in the tree.
Reference count Number of references made to the next hop.
Routing tables used for next-hop resolution.
Contributing routing
tables
Name of the routing table whose active route was used to determine the
Originating RIB
forwarding next-hop entry in the resolution database. For example, in the case
of
inet.0
inet.0
Metric Metric associated with the forwarding next hop.
Node path count Number of nodes in the path.
Number of forwarding next hops. The forwarding next hop is the network layer
Forwarding next
address of the directly reachable neighboring system (if applicable) and the
hops
interface used to reach it.
user@host> show route resolution detail
Tree Index: 1, Nodes 0, Reference Count 1
Contributing routing tables: inet.3
Tree Index: 2, Nodes 23, Reference Count 1
Contributing routing tables: inet.0 inet.3
10.10.0.0/16 Originating RIB: inet.0
Node path count: 1
Forwarding nexthops: 1
10.31.1.0/30 Originating RIB: inet.0
Node path count: 1
Forwarding nexthops: 1
10.31.1.1/32 Originating RIB: inet.0
Node path count: 1
Forwarding nexthops: 0
10.31.1.4/30 Originating RIB: inet.0
Node path count: 1
Forwarding nexthops: 1
10.31.1.5/32 Originating RIB: inet.0
Node path count: 1
Forwarding nexthops: 0
10.31.2.0/30 Originating RIB: inet.0
resolving via and
inet.0 inet.3
or , provided the best path for a particular prefix.
inet.3
show route resolution command.
, this field indicates which routing table,