Dell PowerConnect J-EX4200-24T Software Manual page 2301

Table 285: show pim rps Output Fields (continued)
Field Name Field Description
Family Name of the address family:
RP address Address of the rendezvous point.
Type of RP:
Type
auto-rp
bootstrap
(BSR).
embedded
static
How long to keep the RP active, with time remaining, in seconds.
Holdtime
Timeout How long until the local routing device determines the RP to be unreachable,
in seconds.
Groups Number of groups currently using this RP.
Addresses of groups that this RP can span.
Group prefixes
Address and method by which the RP was learned.
Learned via
How long the RP has been active, in the format
Time Active
Index value of the order in which the Junos OS finds and initializes the interface.
Device Index
Logical unit number of the interface.
Subunit
Interface Either the encapsulation or the de-encapsulation logical interface, depending
on whether this routing device is a designated router (DR) facing an RP router,
or is the local RP, respectively.
Addresses of groups that this RP spans.
Group Ranges
Active groups using Number of groups currently using this RP.
RP
Total number of active groups for this RP.
total
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
inet (IPv4) or
—Address of the RP known through the Auto-RP protocol.
—Address of the RP known through the bootstrap router protocol
—Address of the RP known through an embedded RP (IPv6).
—Address of RP known through static configuration.
inet6 (IPv6).
.
hh:mm:ss
Level of Output
All levels
All levels
none
brief
All levels
All levels
All levels
none
brief
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
2229