Clear (Ospf | Ospf3) Database - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

clear (ospf | ospf3) database

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
1748
clear (ospf | ospf3) database
<advertising-router (router-id | self)>
<area area-id>
<asbrsummary>
<external>
<instance instance-name>
<inter-area-prefix>
<inter-area-router>
<intra-area-prefix>
<link-local>
<logical-system (all | logical-system-name)>
<lsa-id lsa-id>
<netsummary>
<network>
<nssa>
<opaque-area>
<purge>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
<router>
clear (ospf | ospf3) database
<advertising-router (router-id | self)>
<area area-id>
<asbrsummary>
<external>
<instance instance-name>
<inter-area-prefix>
<inter-area-router>
<intra-area-prefix>
<link-local>
<lsa-id lsa-id>
<netsummary>
<network>
<nssa>
<opaque-area>
<purge>
<router>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
With the master Routing Engine, delete entries in the Open Shortest Path First (OSPF)
link-state advertisement (LSA) database. With the backup Routing Engine, delete the
OSPF LSA database and sync the new database with the master Routing Engine. You
can also use the purge command with any of the options to discard rather than delete
the specified LSA entries.
CAUTION: This command is useful only for testing. Use it with care, because
it causes significant network disruption.