Dell PowerConnect J-EX4200-24T Software Manual page 1513

Table 193: RIP Routing Configuration Summary (continued)
Field
Export Policy
Neighbors tab
RIP-Enabled Interfaces
Table 194: Edit RIP Global Settings
Field Function
General tab
Send Specifies RIP send options.
Receive Configure RIP receive options.
Route timeout (sec) Specifies the route timeout interval for RIP.
Update interval Specifies the update time interval to periodically send out
(sec) routes learned by RIP to neighbors.
Hold timeout (sec) Specifies the time period the expired route is retained in
the routing table before being removed.
Metric in Specifies the metric to add to incoming routes when
advertising into RIP routes that were learned from other
protocols.
RIB Group Specifies a routing table group to install RIP routes into
multiple routing tables.
Message size Specifies the number of route entries to be included in
every RIP update message.
Function
Applies a policy to routes being exported to the
neighbors.
Selects the interfaces to be associated with
the RIP instance.
Chapter 71: Configuring Layer 3 Protocols
Your Action
Click Add to add an export policy.
Click Move up or Move down to move the
selected policy up or down the list of policies.
Click to remove an export policy.
Remove
To enable RIP on an interface, click the check
box next to the interface name.
Click Edit if you want to modify an interface's
settings.
Your Action
Select a value.
Select a value.
Type a value.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Select and edit the name of the routing
table group.
Type or select and edit the value.
1441