Show Pim Join - Dell PowerConnect J-EX4200-24T Software Manual

show pim join

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show pim join
<brief | detail | extensive>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
<range>
show pim join
<brief | detail | extensive>
<inet | inet6>
<instance instance-name>
<range>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about Protocol Independent Multicast (PIM) groups.
—Display the standard information about PIM groups for all supported family
none
addresses for all routing instances.
brief | detail | extensive —(Optional) Display the specified level of output.
—(Optional) Display PIM group information for IPv4 or IPv6 family addresses,
inet | inet6
respectively.
—(Optional) Display information about groups for the specified
instance instance-name
PIM-enabled routing instance only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
range —(Optional) Address range of the group, specified as
view
clear pim join on page 2157
show pim join on page 2221
show pim join instance on page 2221
show pim join detail on page 2222
show pim join extensive on page 2222
show pim join instance extensive on page 2223
Table 283 on page 2220 describes the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
prefix/prefix-length
show pim join
.
command. Output
2219