Table of Contents
Advertisement
Introduction to Timing Analysis
Modify Channel Assignments
Modify Channel Assignments
In this exercise, you will assign the active bits of pod A1 to the label TCOUNT.
Using the arrow keys, highlight the field showing the 16 channels of
1
Pod A1, to the far right of the TCOUNT label. Press the
Press the
2
Use the knob to move the cursor to channel 7 in the pop-up menu.
3
Press the ⇑ (up-arrow) key to put asterisks in the lower eight channel
4
positions.
Press the
5
Pod A1 has 16
channels and is
connected to the
training board.
An asterisk (*) assigns
a channel to a label. In
this exercise, the lower
eight channels are
assigned to TCOUNT.
Modifying Channel Assignments
Result
The lower 8 channels of pod A1 are assigned to the label TCOUNT.
2-6
Clear Entry
key to clear the default bit assignments.
Done
key.
Get other manuals https://www.bkmanuals.com
Select
key.
Advertisement
Table of Contents
