Brakes - Can-Am OUTLANDER 6x6 2021 Series Operator's Manual

Table of Contents

Advertisement

SUSPENSION GREASE
Scandinavia
All other
countries
Rear Suspension Lubrication
Lubricate rear stabilizer bar links and
pivot bushing at grease fittings.
SUSPENSION GREASE
Scandinavia
All other
countries
Suspension Inspection
Shock Absorbers
Inspect shock absorber for oil leaks or
other damage.
Check tightness of fasteners.
See an authorized Can-Am dealer as
necessary.
Ball Joints
Inspect ball joint boots for cracks.
WARNING
The ball joint must be replaced if
the boot is cracked.
Front A-Arms
Check A-arms for cracks, bending or
other damage.
See an authorized Can-Am dealer as
necessary.
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
______________
MAINTENANCE PROCEDURES
Rear Trailing Arms
Check trailing arms for distortion,
cracks or bending.
See an authorized Can-Am dealer if any
problem is detected.

Brakes

Brake Fluid Reservoir Level
Verification
With vehicle on a level surface, check
brake fluid in reservoirs for proper
level.
NOTE: A low level may indicate leaks
or worn brake pads.
Front Brake Reservoir Level
Verification
Turn steering in the straight-ahead po-
sition to ensure reservoir is level.
Check the brake fluid level, the reser-
voir is full when the fluid reaches of the
top of window.
Visually inspect lever boot condition.
Check for cracks, tears, etc. Replace if
damaged.
vmo2012-012-046_a
TYPICAL
Rear Brake Reservoir Level
Verification
Remove the seat.
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Outlander 6x6 max dps 650Outlander 6x6 max xt 1000

Table of Contents