Can-Am DS 90 Operator's Manual
  1. Manuals
  2. Brands
  3. Can-Am Manuals
  4. Offroad Vehicle
  5. 2007 Mini DS90
  6. Operator's manual

Can-Am DS 90 Operator's Manual

Hide thumbs Also See for DS 90:
Table of Contents

Advertisement

Quick Links

Read this guide thoroughly. It contains important safety information.
Category Y ATV, always follow this age recommendation under adult supervision:
Age 10 or older for DS 90 and DS 90 X. Keep this Operator's Guide in the vehicle.
2 1 9
0 0 1
2015
and
(All countries except Canada/United States)
5 6 7
Operator's
Safety, Vehicle
Maintenance Information
DS 90
DS 90
Original Instructions
Original Instructions
Guide
Includes
TM
X
TM
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS 90 and is the answer not in the manual?

Questions and answers

Related Manuals for Can-Am DS 90

Summary of Contents for Can-Am DS 90

  • Page 1 Read this guide thoroughly. It contains important safety information. Category Y ATV, always follow this age recommendation under adult supervision: Age 10 or older for DS 90 and DS 90 X. Keep this Operator’s Guide in the vehicle. 2 1 9...
  • Page 2 The following trademarks are the property of Bombardier Recreational Products Inc.: Can-Am™ DS 90™ XPS™ vmo2015-028 en ®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. ©2014 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

  • Page 3: Foreword

    Congratulations on your purchase of a At delivery, you were also informed of new Can-Am™ ATV. It is backed by the the warranty coverage and signed the PREDELIVERY CHECK LIST BRP warranty and a network of autho-...

  • Page 4: Age Recommendation

    (Youth Model), always follow this age ponents or other property. recommendation: – DS 90™ and DS 90 X vehicles are a About this Operator's category Y-10+ and should be used Guide by children age 10 or older under...

  • Page 5: Notice To Parents

    FOREWORD Notice to Parents Review this Operator’s Guide with any user of the vehicle. Please take time with the children to review the instructions on its safe and proper use, and pay particular attention to the on-product safety labels, before allowing them to ride the vehicle.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS FOREWORD ................1 Know Before you Go .
  • Page 7 TABLE OF CONTENTS CONTROLS/INSTRUMENTS/EQUIPMENT (cont’d) 5) Transmission Lever............64 6) Multifunction Switch .
  • Page 8 Mechanical Brakes (DS 90)........

  • Page 9: Safety Information

    SAFETY INFORMATION ________ ________ SAFETY INFORMATION...

  • Page 10: General Precautions

    – Never run the vehicle outdoors the vehicle illegal. where engine exhaust can be drawn See your authorized Can-Am dealer for into a building through openings available accessories for your vehicle. such as windows and doors.

  • Page 11: Special Safety Messages

    – Always keep both hands on the han- – Always follow this age recommen- dlebars and both feet on the foot- dation: DS 90 and DS 90 X vehicles pegs of the vehicle during opera- should be used by children age 10 tion.
  • Page 12 SPECIAL SAFETY MESSAGES – Always follow proper procedures – Always check for obstacles before operating in a new area. Never at- for climbing hills as described fur- ther in this Operator’s Guide. Check tempt to operate over large obsta- the terrain carefully before you start cles, such as large rocks or fallen up any hill.
  • Page 13 SPECIAL SAFETY MESSAGES – Never load a youth model vehicle. – Never operate this vehicle without proper instruction. Take a train- ing course. All operators should receive training from a certified in- structor. ________ ________ SAFETY INFORMATION...

  • Page 14: Operation Warnings

    Beginners and inexperienced operators should complete a training course. They should then regularly practice the skills learned during the course as well as the operating techniques described in this Operator’s Guide. For more information about the training course, contact an authorized Can-Am dealer. _______ ________ SAFETY INFORMATION...
  • Page 15 HOW TO AVOID THE HAZARD DS 90 and DS 90 X vehicles should be used by children age 10 or older under adult supervision, or by an operator age 16 or older.
  • Page 16 OPERATION WARNINGS WARNING POTENTIAL HAZARD Carrying a passenger on this vehicle. WHAT CAN HAPPEN Greatly reduces your ability to balance and control this vehicle. Could cause an accident, resulting in harm to you and/or your passenger. HOW TO AVOID THE HAZARD Never carry passenger.
  • Page 17 OPERATION WARNINGS WARNING POTENTIAL HAZARD Operating this vehicle on paved surfaces. WHAT CAN HAPPEN The tires are designed for off-road use only, not for use on pavement. Paved surfaces may seriously affect handling and control of this vehicle, and may cause the vehicle to go out of control.
  • Page 18 OPERATION WARNINGS WARNING POTENTIAL HAZARD Operating this vehicle on public streets, roads or highways. WHAT CAN HAPPEN You can collide with another vehicle. HOW TO AVOID THE HAZARD Never operate this vehicle on any public street, road or highway, even a dirt or gravel one.
  • Page 19 OPERATION WARNINGS WARNING POTENTIAL HAZARD Riding this vehicle without wearing an approved helmet, eye protection and protective clothing. WHAT CAN HAPPEN The following items concern all ATV's operator: – Riding without an approved helmet increases the chances of a severe head injury or death in the event of an accident.
  • Page 20 OPERATION WARNINGS WARNING V00A07Q POTENTIAL HAZARD Using this vehicle with drugs or alcohol. WHAT CAN HAPPEN Could seriously affect your judgment. Could cause you to react more slowly. Could affect your balance and perception. Could result in an accident or death. HOW TO AVOID THE HAZARD Never use this vehicle with drugs or alcohol.
  • Page 21 OPERATION WARNINGS WARNING V00A08Q POTENTIAL HAZARD Operating this vehicle at excessive speeds. WHAT CAN HAPPEN Increases your chances of losing control of the vehicle, which can result in an accident. HOW TO AVOID THE HAZARD Always travel at a speed which is appropriate for the terrain, visibility and operating conditions, and your experience.
  • Page 22 OPERATION WARNINGS WARNING POTENTIAL HAZARD Attempting wheelies, jumps and other stunts. WHAT CAN HAPPEN Increases the chance of an accident, including an overturn. HOW TO AVOID THE HAZARD Never attempt stunts, such as wheelies or jumps. Do not try to show off. WARNING POTENTIAL HAZARD Failure to inspect the vehicle before operating.
  • Page 23 OPERATION WARNINGS WARNING POTENTIAL HAZARD Riding on frozen waterways. WHAT CAN HAPPEN Breaking through the ice can lead to severe injury or death. HOW TO AVOID THE HAZARD Never ride this vehicle on a frozen surface before you are sure the ice is thick enough and sound enough to support the vehicle and its load, as well as the force that is created by a moving vehicle.
  • Page 24 OPERATION WARNINGS WARNING POTENTIAL HAZARD Failure to use extra care when operating this vehicle on unfamiliar terrain. WHAT CAN HAPPEN You can come upon hidden rocks, bumps, or holes without enough time to react. Could result in the vehicle overturning or loss of control. HOW TO AVOID THE HAZARD Go slowly and be extra careful when operating on unfamiliar terrain.
  • Page 25 OPERATION WARNINGS WARNING POTENTIAL HAZARD Failure to use extra care when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN Could cause loss of traction or vehicle control, which could result in an acci- dent, including an overturn. HOW TO AVOID THE HAZARD Do not operate on excessively rough, slippery or loose terrain until you have learned and practiced the skills necessary to control this vehicle on...
  • Page 26 OPERATION WARNINGS WARNING POTENTIAL HAZARD Turning improperly. WHAT CAN HAPPEN Vehicle could go out of control, causing a collision or overturn. HOW TO AVOID THE HAZARD Always follow proper procedures for turning as described further in this Op- erator’s Guide. Practice turning at low speeds before attempting to turn at faster speeds.
  • Page 27 OPERATION WARNINGS WARNING POTENTIAL HAZARD Operating on excessively steep hills. WHAT CAN HAPPEN The vehicle can overturn more easily on extremely steep hills than on level surfaces or small hills. HOW TO AVOID THE HAZARD Never operate this vehicle on hills too steep for the vehicle or for your abili- ties.
  • Page 28 OPERATION WARNINGS WARNING POTENTIAL HAZARD Climbing hills improperly. WHAT CAN HAPPEN Could cause loss of control or cause vehicle to overturn. HOW TO AVOID THE HAZARD Always follow proper procedures for climbing hills as described further in this Operator’s Guide. Always check the terrain carefully before you start up any hill.
  • Page 29 OPERATION WARNINGS WARNING POTENTIAL HAZARD Going down a hill improperly. WHAT CAN HAPPEN Could cause loss of control or cause vehicle to overturn. HOW TO AVOID THE HAZARD Always follow proper procedures for going down hills as described further in this Operator’s Guide. NOTE: A special technique is required when braking as you go down a hill.
  • Page 30 OPERATION WARNINGS WARNING POTENTIAL HAZARD Improperly crossing hills or turning on hills. WHAT CAN HAPPEN Could cause loss of control or cause vehicle to overturn. HOW TO AVOID THE HAZARD Never attempt to turn the vehicle around on any hill until you have mastered the turning technique as described further in this Operator’s Guide on level ground.
  • Page 31 OPERATION WARNINGS WARNING POTENTIAL HAZARD Stalling, rolling backwards or improperly dismounting while climbing a hill. WHAT CAN HAPPEN Could result in vehicle overturning. HOW TO AVOID THE HAZARD Use proper gear and maintain steady speed when climbing a hill. If you lose all forward speed: Keep your weight uphill.
  • Page 32 OPERATION WARNINGS WARNING POTENTIAL HAZARD Improperly operating over obstacles. WHAT CAN HAPPEN Could cause loss of control or a collision. Could cause the vehicle to overturn. HOW TO AVOID THE HAZARD Before operating in a new area, check for obstacles. Never attempt to ride over large obstacles, such as large rocks or fallen trees.
  • Page 33 OPERATION WARNINGS WARNING POTENTIAL HAZARD Skidding or sliding improperly. WHAT CAN HAPPEN You may lose control of this vehicle. You may also regain traction unexpectedly, which may cause the vehicle to overturn. HOW TO AVOID THE HAZARD Learn to safely control skidding or sliding by practicing at low speeds and on level smooth terrain.
  • Page 34 OPERATION WARNINGS WARNING POTENTIAL HAZARD Operating this vehicle through deep or fast flowing water. WHAT CAN HAPPEN Tires may float, causing loss of traction and loss of control, which could lead to an accident. HOW TO AVOID THE HAZARD Never operate this vehicle in fast flowing water or in water deeper than that specified further in this Operator’s Guide.
  • Page 35 OPERATION WARNINGS WARNING POTENTIAL HAZARD Improperly operating in reverse. WHAT CAN HAPPEN You could hit an obstacle or person behind the vehicle, resulting in serious injury. HOW TO AVOID THE HAZARD When you select reverse gear, make sure there are no obstacles or people behind the vehicle.
  • Page 36 OPERATION WARNINGS WARNING POTENTIAL HAZARD Operating this vehicle with improper tires, or with improper or uneven tire pressure. WHAT CAN HAPPEN Use of improper tires on this vehicle, or operation of this vehicle with improper or uneven tire pressure, may cause loss of control, tire blow outs, tire to move around on its rim, and increases the risk of an accident.
  • Page 37 All parts and accessories added to this vehicle should be approved by BRP and should be installed and used according to instructions. If you have questions, consult an authorized Can-Am dealer. NEVER install passenger seat or use the racks to carry a passenger.
  • Page 38 OPERATION WARNINGS WARNING POTENTIAL HAZARD Overloading this vehicle, carrying or towing cargo improperly. WHAT CAN HAPPEN Could cause changes in vehicle handling which could lead to an accident. HOW TO AVOID THE HAZARD Never load cargo on this vehicle. Never tow cargo or another vehicle with this vehicle. _______ ________ SAFETY INFORMATION...
  • Page 39 OPERATION WARNINGS WARNING V03M01Q POTENTIAL HAZARD Transporting flammable or dangerous material can lead to explosions. WHAT CAN HAPPEN This can cause serious injury or death. HOW TO AVOID THE HAZARD Never transport flammable or dangerous material. ________ ________ SAFETY INFORMATION...

  • Page 40: Riding The Vehicle

    Correct any problem that you discover to reduce the risk of a breakdown or crash. See an authorized Can-Am dealer if necessary. Before using this vehicle, the operator and/or an adult should always perform the following pre-ride inspection check list.

  • Page 41: Pre-Ride Inspection Check List

    ✔ INSPECTION TO PERFORM INSPECTED Check fuel and engine oil. Fluids Check brake system for fluid leaks (DS 90 X). Leaks Check for any leaks under vehicle. Check if steering operates freely by completely turning it Steering from side to side.
  • Page 42 RIDING THE VEHICLE What to Do Before Starting the Engine (Key ON) ITEMS TO BE ✔ INSPECTION TO PERFORM INSPECTED Check operation of engine oil/temperature indicator lamp (during first few seconds of key ON). Indicator lamps Ensure the N (neutral) and R (reverse) indicator lamps come ON as applicable to transmission lever selection.

  • Page 43: Clothing

    RIDING THE VEHICLE Clothing Actual weather conditions should help you decide how to dress. Always dress for the coldest weather expected. Thermal underwear next to the skin provides good insulation. It is important that the operator always wears the appropriate protective clothing and apparel, including an approved helmet, eye protection, boots, gloves, a long sleeved shirt and pants.

  • Page 44: Carrying A Passenger

    RIDING THE VEHICLE Carrying a Passenger This vehicle is designed specifically to carry an operator only. Even with a long seat, this vehicle is not designed nor intended to carry passenger(s). Carrying passenger(s) may affect the stability and your control of the vehicle. Carrying Loads Never load cargo on this vehicle.

  • Page 45: Design Limitation

    RIDING THE VEHICLE This vehicle can cause OHV wildfires if debris builds up near the exhaust or other engine hot spots and ignites then falls off into dry grass. Avoid riding in wet areas, through muskeg or tall grass, where debris can build up. Should you ride in those areas, inspect and remove all debris from your engine and hot spots.
  • Page 46 RIDING THE VEHICLE Constantly watch the terrain ahead for sudden changes in slopes or obstacles, such as rocks or stumps, that may cause loss of stability, resulting in tip-over or rollover. Never operate the vehicle if the controls do not function normally. When operating in reverse, check that the path behind the vehicle is free of people or obstacles.
  • Page 47 RIDING THE VEHICLE Drop-Offs This vehicle will “bottom-out“ and usually stop if either the front or rear wheels are driven over a drop-off. If the drop is sharp or deep, the vehicle will nose dive and tip over. WARNING Avoid negotiating drop-offs. Reverse and select an alternate route. Riding on Snow Covered Surfaces When performing the pre-ride inspection, pay special attention to locations on the vehicle where snow and/or ice accumulations may obstruct visibility of the lights...

  • Page 48: Riding Techniques

    RIDING THE VEHICLE At the end of each ride it is a good practice to clean the vehicle body and all moving components (brakes, steering components, drive lines, controls, etc.) from any snow or ice accumulations. Wet snow will turn to ice during the shut down period and become more difficult to remove at the next pre-ride inspection.
  • Page 49 RIDING THE VEHICLE Even though there is an adequate suspension system on this vehicle, there are “washboard” or rough terrain conditions that will make you feel uncomfortable and can even cause a back injury. “Posting“ or riding in a crouched position will often be required.
  • Page 50 RIDING THE VEHICLE If your route crosses frozen waterways, make sure the ice is thick enough and sound enough to support the total weight of yourself, the vehicle and its load. Be ever watchful of open water... it is a sure indication that the ice thickness will vary. If in doubt, do not attempt to cross.
  • Page 51 RIDING THE VEHICLE vmo2012-012-525 If you do get into a slide or skid, it may help to turn the handlebar in the direction of the skid until you regain control. Never jam the brakes and lock the wheels. Respect and follow all posted trail signs. They are there to help you and others. Obstacles in the “trail“...
  • Page 52 RIDING THE VEHICLE Uphill Before trying to climb a hill, keep these things in mind. Hill Climbing should only be attempted by experienced operators. Start on shallow slopes. Always drive straight uphill and keep your body weight forward towards the top of the hill. Keep your feet on the footrests, shift your ATV into a lower gear and accelerate before you start to climb.
  • Page 53 RIDING THE VEHICLE Downhill Keep your body weight rearwards. Apply the brake gradually to prevent skidding. Do not “coast“ down the slope using solely engine compression or in neutral gear. Try to avoid steep inclines. If you're not careful, you could tip over when going down hills.
  • Page 54 RIDING THE VEHICLE Side Hilling This is one of the most risky types of riding since it may drastically change the bal- ance of the vehicle. It should be avoided wherever possible. However, if it is nec- essary to do so, it is important that you ALWAYS keep your body weight on the up- side of the slope...

  • Page 55: Important On Product Labels

    IMPORTANT ON PRODUCT LABELS Hang Tag This vehicle comes with a hang tag containing important information. Any person who rides this vehicle should read and understand this information be- fore riding. WARNING – Locate and read operator's guide. Improper ATV use can result in SE- VERE INJURY or DEATH.
  • Page 56 IMPORTANT ON PRODUCT LABELS 704901107 vmo2006-005-009_en _______ ________ SAFETY INFORMATION...

  • Page 57: Vehicle Safety Labels

    The safety labels on your vehicle should be considered permanent parts of the ve- hicle. If missing or damaged, they can be replaced free of charge. See an autho- rized Can-Am dealer. NOTE: In the event of any discrepancy between this guide and the vehicle, the safety labels on the vehicle have precedence over the labels in this guide.
  • Page 58 IMPORTANT ON PRODUCT LABELS Label 1 WARNING – Locate and read operator's guide. Improper ATV use can result in SEVERE INJURY or DEATH. Follow all instructions and warnings. 704903684 – Always wear ear protection. 704903684 – Always use an approved helmet LABEL 2 and protective gear.
  • Page 59 IMPORTANT ON PRODUCT LABELS Label 4 WARNING – Locate and read operator's guide. – Improper overloading or tire pressure can cause loss of con- trol, resulting in SEVERE IN- JURY or DEATH. – ALWAYS maintain proper tire pressure as shown. –...

  • Page 60: Compliance Labels

    IMPORTANT ON PRODUCT LABELS Compliance Labels These labels indicate vehicle's compliance. V00m03y2 LOCATION: LOWER RIGHT FRONT TUBE OF THE FRAME ENGINE FAMILY FAMILLE DE MOTEUR PERMEATION FAMILY FAMILLE DE PERMEATION CERTIFICATION LIMITE DES ÉMISSIONS STANDARD (FEL) DE LA FAMILLE EMISSION CONTROL INFORMATION CYLINDRÉE ENGINE DISPLACEMENT THIS VEHICLE IS CERTIFIED TO OPERATE ON UNLEADED GASOLINE AND MEETS...

  • Page 61: Vehicle Information

    VEHICLE INFORMATION _______________...

  • Page 62: Controls/Instruments/Equipment

    CONTROLS/INSTRUMENTS/EQUIPMENT vmo2010-003-101_b TYPICAL ______________...

  • Page 63: Throttle Lever

    CONTROLS/INSTRUMENTS/EQUIPMENT NOTE: This section provides basic Speed Limiter information on the functions of the var- This vehicle is equipped with an ad- ious controls of your vehicle. For more justable speed limiter screw on the details on how to operate a control in throttle lever housing.

  • Page 64: Rh Brake Lever

    CONTROLS/INSTRUMENTS/EQUIPMENT DS 90 AND SPEED SETTING DS 90 X Factory limited 24 km/h (15 MPH) speed Maximum unrestricted 48 km/h (30 MPH) speed WARNING vmo2008-020-004_b When traveling downhill, grav- 1. Lock nut ity can increase the vehicle speed 2. Speed limiter screw...

  • Page 65: Lh Brake Lever

    The brake lever is now held in applying the rear brake(s). DS 90 vmo2008-020-006_a TYPICAL 1. Brake lever 2. To apply brake vmo2008-008-008_b TYPICAL —...

  • Page 66: Transmission Lever

    CONTROLS/INSTRUMENTS/EQUIPMENT DS 90 X Only vmo2008-008-018_a TRANSMISSION LEVER PATTERN vmo2008-020-014_a 1. Transmission lever LH BRAKE LEVER 2. Forward (F) Step 1: Squeeze brake lever and maintain 3. Neutral (N) Step 2: Push lever lock 4. Reverse (R) All Models To change the transmission position,...

  • Page 67: Multifunction Switch

    CONTROLS/INSTRUMENTS/EQUIPMENT NOTE: While the engine can be WARNING stopped by turning the ignition key Before operating the vehicle in re- to the OFF position, we recommend verse, ensure the path behind is the engine be stopped by setting the clear of obstacles or bystanders. emergency engine stop switch to the BRP recommends that you remain STOP position.

  • Page 68: Indicator Lamps

    CONTROLS/INSTRUMENTS/EQUIPMENT vmo2009-004-005_c vmo2009-004-006_a 1. Engine start button FULL CHOKE POSITION Choke Lever The other positions between OFF and FULL will be used depending on the This device features a variable position engine temperature. lever used to ease starting a cold en- gine.

  • Page 69: Ignition Switch

    CONTROLS/INSTRUMENTS/EQUIPMENT 9) Fuel Valve Reverse Lamp (RED) The fuel valve is located on the LH side When lit, it indicates the of the vehicle near the engine. transmission reverse position. This is a 3 position rotary valve: OFF, ON, RES (reserve). Rotate the valve to align its arrow to the desired position.

  • Page 70: 10) Seat Latch

    CONTROLS/INSTRUMENTS/EQUIPMENT RES (Reserve) When the normal supply of fuel in the tank is used up (ON position), an emer- gency supply of fuel is available by turn- ing the valve to RES. Use the RES posi- tion only when the ON supply is empty. When in reserve, refuel as soon as pos- sible.

  • Page 71: Front Storage Compartment

    CONTROLS/INSTRUMENTS/EQUIPMENT vmo2008-008-020_a 1. Tool kit 12) Front Storage vmo2008-008-023_a TYPICAL Compartment A convenient area to carry personal ar- WARNING ticles. When engine is running, always engage the NEUTRAL position on the transmission lever and ap- ply parking brake before opening cover.

  • Page 72: Fuel

    FUEL Fuel Requirements NOTICE Never experiment with other fuels. Engine or fuel system NOTICE Always use fresh gaso- damages may occur with the use of line. Gasoline will oxidize; the re- an inadequate fuel. sult is loss of octane, volatile com- pounds, and the production of gum Fueling Procedure and varnish deposits which can...
  • Page 73 FUEL vmo2015-004-501 TYPICAL — FUEL TANK CAP 4. Insert the spout in the filler neck. 5. Pour fuel slowly to allow time for the air in the tank to escape and prevent fuel flow back. Be careful not to spill fuel.

  • Page 74: Break-In Period

    After the break-in period, the vehicle should be inspected by an authorized MAINTE- Can-Am dealer. Refer to NANCE INFORMATION Engine During the break-in period: – Avoid full throttle operation. – Maximum throttle should not ex- ceed 3/4.

  • Page 75: Operating Instructions

    OPERATING INSTRUCTIONS Starting the Engine (Basic Procedure) WARNING Always proceed with the pre-ride inspection as described in the SAFETY INFORMATION section prior to operating the vehicle. Al- ways check for proper operation of critical controls, safety features and mechanical components be- fore starting.

  • Page 76: Using The Choke To Start The Engine

    OPERATING INSTRUCTIONS NOTE: Throttle assist may be used to help start the engine faster. Press the throttle lever slightly; if it is pressed too much, the choke system will not be ac- tivated. mmo2008-008-051_a TYPICAL 1. Kick start pedal Repeat this procedure completely if necessary.

  • Page 77: Stopping The Engine

    OPERATING INSTRUCTIONS Shifting the Transmission Cold Weather (Above 0°C (32°F)) In temperatures above 0°C (32°F), Let engine idle to warm up. place choke lever at 75% of full choke Apply brakes and set the transmission position. selector lever to ”F” (forward), or ”R” After engine starts, leave choke at (reverse).

  • Page 78: Tune Your Ride

    Lengthen the springs for a softer ride and smooth road condition. Adjust by turning adjustment cam or ring accordingly. Use tool from vehicle vmo2008-020-010_a tool kit. DS 90 X — FRONT SUSPENSION 1. Front spring 2. Loosen locking ring 3. Turn adjustment ring ______________...
  • Page 79 TUNE YOUR RIDE vmo2008-008-030_a DS 90 — REAR SUSPENSION 1. Rear spring 2. Turn adjusting cam vmo2008-020-011_a DS 90 X — REAR SUSPENSION 1. Rear spring 2. Loosen locking ring 3. Turn adjustment ring While reading this Operator’s Guide, remember that: WARNING Indicates a potential hazard that, if not avoided, could result in serious injury or death.

  • Page 80: Vehicle Transportation

    DS 90 — FRONT TIE-DOWN POINT LOCATION (on all four wheels) facing towards the front of the transporting vehi- cle. vmo2008-020-012_a DS 90 X — FRONT TIE-DOWN POINT LOCATION V00A17Y Remember to: – Set the fuel valve to the OFF posi- tion.

  • Page 81: Maintenance

    MAINTENANCE _______________...

  • Page 82: Break-In Inspection

    BREAK-IN INSPECTION BRP suggests that after the first 5 hours or 100 km (62 mi) of operation, whichever comes first, your vehicle be inspected by an authorized Can-Am dealer. The break-in inspection is very important and must not be neglected.

  • Page 83: Break-In Inspection Chart

    BREAK-IN INSPECTION Break-In Inspection Chart REPLACE ADJUST TIGHTEN BREAK-IN INSPECTION CHART LUBRICATE CLEAN INSPECT ENGINE Engine oil Valve clearance FUEL SYSTEM Fuel lines and connections Throttle cable/housing Carburetor Idle speed ELECTRICAL SYSTEM Spark plug Battery Battery voltage CVT TRANSMISSION CVT air inlet/outlet ducts GEARBOX Gearbox oil WHEEL/TIRES...

  • Page 84: Maintenance Schedule

    MAINTENANCE SCHEDULE Maintenance is very important for keeping your vehicle in safe operating condition. Proper maintenance is the owner's responsibility. The vehicle should be serviced as per maintenance schedule. The maintenance schedule does not exempt the pre-ride inspection. WARNING Failure to properly maintain the vehicle according to the maintenance schedule and procedures can make it unsafe to operate.

  • Page 85: Fuel System

    MAINTENANCE SCHEDULE MAINTENANCE SCHEDULE WEEKLY A: Adjust MONTHLY C: Clean ONCE A YEAR OR EVERY 100 HOURS I: Inspect L: Lubricate EVERY 2 YEARS OR 200 HOURS R: Replace TO BE PERFORMED BY PART/TASK LEGEND FUEL SYSTEM Fuel lines and Dealer connections Fuel filter...

  • Page 86: Gearbox

    Steering system Dealer SUSPENSION — Suspension system Customer BRAKES Dealer/ (7) Brake fluid replacement Brake fluid (DS 90 X) Customer or any brake system repairs must be performed by an I, A Dealer Brake system authorized Can-Am dealer. (7) (8)

  • Page 87: Maintenance Procedures

    If not, see your authorized Can-Am dealer. Other important items in the mainte- nance schedule that are more difficult and require special tools are best per- formed by your authorized Can-Am dealer. vmo2008-008-021_a WARNING TYPICAL — RH SIDE OF ENGINE 1.
  • Page 88 MAINTENANCE PROCEDURES Completely tighten dipstick. Engine Oil Viscosity Chart Recommended Engine Oil SAE 0W30 For the summer season, use XPS 4-STROKE SYNTH. BLEND OIL (SUM- MER) (P/N 293 600 121). SAE 5W30 For the winter season, use XPS 4-STROKE SYNTHETIC OIL (ALL CLI- MATE) (P/N 293 600 112).

  • Page 89: Oil Strainer

    MAINTENANCE PROCEDURES Remove dipstick. Install and torque strainer cover to 42 N•m ± 4 N•m (31 lbf•ft ± 3 lbf•ft). Clean drain plug washer and check it's condition, replace it if necessary. Clean engine and drain plug contact surfaces, then reinstall drain plug and torque it to 22.0 N•m ±...

  • Page 90: Air Filter

    MAINTENANCE PROCEDURES To clean oil strainer, use a solvent, then NOTE: Riding in a group in these con- ditions increases even more the air dry using compressed air. filter maintenance and replacement requirement. CAUTION Always wear propriate skin and eye protection. Air Filter Location Chemicals can cause skin rash and eye injury.

  • Page 91: Air Filter Housing

    MAINTENANCE PROCEDURES Air Filter Housing Air Filter Housing Draining Periodically inspect air filter housing drain tube for liquids or deposits. vmo2015-004-502_a 1. Air filter Air Filter Maintenance and Replacement For light maintenance on air filter, com- pressed air can be used to remove dust mmo2008-008-057_a from air filter.

  • Page 92: Air Injection Valve

    MAINTENANCE PROCEDURES When liquids or deposits are found, air Remove filter from air injection valve. filter and housing must be inspected, dried or replaced depending on its con- dition. Air Injection Valve Air Injection Valve Location Air injection valve is located on the LH side of the vehicle underneath front vmo2013-004-009_a fender.

  • Page 93: Cvt Cover

    CVT Cover Draining Whenever you suspect that water has entered the CVT cover, drain the CVT housing by removing the drain tube plug. vmo2008-020-013_a DS 90 X 1. Muffler cover 2. Remove screws Remove the spark arrester from the muffler. mmo2008-008-060_a LH SIDE OF VEHICLE 1.
  • Page 94 MAINTENANCE PROCEDURES The only way to ensure the level is cor- rect is to drain the gearbox and refill it with the specified quantity of the recommended gearbox oil. Refer to GEARBOX OIL CHANGE for proce- dure. Gearbox Oil Change Place the vehicle on a level surface.

  • Page 95: Throttle Cable

    Be sure gearbox is Can-Am dealer. completely drained before replen- normal throttle free-play ishing it with the specified amount 5 mm to 10 mm (.197 in to .394 in).

  • Page 96: Spark Plug

    MAINTENANCE PROCEDURES cable is properly routed and not bind- ing on anything when the handlebar is turned. Spark Plug Spark Plug Location vmo2008-008-028_a 1. Rubber protector Loosen lock nut and turn the adjuster to obtain proper adjustment. NOTE: Measure throttle free play at the tip of throttle lever.

  • Page 97: Battery

    MAINTENANCE PROCEDURES Battery Maintenance CAUTION Never charge a bat- tery while installed in vehicle. NOTICE Never remove the battery sealing cap. These vehicles are equipped with a VRLA battery (Valve Regulated Lead Acid). It is a maintenance-free type battery, there is no need to add water vmo2008-008-035_a to adjust electrolyte level.

  • Page 98: Fuse

    NOTICE Always reconnect RED (+) cable first, then the BLACK (-) cable. Daytime Running Light Bulb Replacement Fuse DS 90 Fuse Replacement CAUTION Always turn the ig- NOTICE Do not use a higher rated nition switch to the OFF position fuse as this can cause severe electri- before replacing a defective bulb.

  • Page 99: Drive Chain And Sprockets

    MAINTENANCE PROCEDURES vmo2008-008-038_a vmo2008-008-040_a REMOVE RUBBER PROTECTOR PULL ON BULB TO REMOVE THEN REPLACE 1. Rubber protector BULB 1. Bulb Drive Chain and Sprockets Drive Chain and Sprocket Inspection NOTICE Replace chain sprockets together to prevent rapid wear of these components. NOTICE Never operate this vehi- cle with the drive chain too loose or...
  • Page 100 MAINTENANCE PROCEDURES NOTICE Never adjust the drive chain with the driver seated on the vehicle. Remove any load on the ve- hicle. 1. Place vehicle on a level surface and set transmission to NEUTRAL. 2. Check drive chain condition. 3. Loosen drive axle locking bolts. vmo2008-008-048_a 1.

  • Page 101: Tires And Wheels

    MAINTENANCE PROCEDURES Tires and Wheels Tire Pressure WARNING Tire pressure greatly affects ve- hicle handling and stability. Low pressure may cause tire to deflate and rotate on wheel. Overpres- sure may burst the tire. Always follow recommended pressure. NEVER set tire pressure below vmo2008-008-047_a minimum.

  • Page 102: Steering System

    WHEEL LUG NUTS TORQUE Push and pull on the top of each wheel to check for free play. See an autho- 40 N•m ± 4 N•m rized Can-Am dealer if any free play is Front and rear (30 lbf•ft ± 3 lbf•ft) felt.

  • Page 103: Mechanical Brakes (Ds 90)

    GREASE brakes are applied. (P/N 293 550 033) or an equivalent. If correct adjustment is unattainable, see an authorized Can-Am dealer for cable replacement. Inspect brake cables for excessive wear, kinking or fraying. Replace any cable that show signs of wear, fraying or other damages.
  • Page 104 MAINTENANCE PROCEDURES Front Brake Cable Adjustment Fully tighten all adjustment screws on brake cables. vmr2008-106-012_a A. 10 mm to 12 mm (.4 in to .5 in) Tighten all adjustment screw locks. vmr2008-106-010_a 1. Adjustment screws on lever Rear Brake Lever Adjustment Position the vehicle on a level surface.

  • Page 105: Hydraulic Brakes (Ds 90 X)

    1 mm (.039 in) MINIMUM sition. THICKNESS Lower the vehicle on the ground. See your authorized Can-Am dealer if a problem is detected concerning the Hydraulic Brakes (DS 90 X) brake system. WARNING Recommended Brake Fluid...

  • Page 106: Frame

    NOTE: A low level may indicate leaks or worn brake pads. See an authorized Can-Am dealer. Visually inspect lever boot condition. Check for cracks, tears, or other dam- ages. Replace if damaged.

  • Page 107: Vehicle Care

    VEHICLE CARE Post-Operation Care When the vehicle is used in a salt- water environment, rinsing the vehicle with fresh water is necessary to pre- serve the vehicle and its components. Lubrication of metal parts is highly rec- ommended. Use XPS LUBE (P/N 293 600 016).

  • Page 108: Storage And Preseason Preparation

    SCHEDULE When a vehicle is not in use for a period of four months, proper storage is a ne- cessity. See an authorized Can-Am dealer for proper procedures. When using your vehicle after storage, a post storage preparation is required.

  • Page 109: Technical Information

    TECHNICAL INFORMATION ______________...

  • Page 110: Vehicle Identification

    These numbers are also required by the authorized Can-Am dealer to complete warranty claims properly. No warranty will be allowed by BRP if the engine identification number (EIN)

  • Page 111: Ec Declaration Of Conformity

    The EC-Declaration of Conformity does not appear in this version of the Operator's Guide. Please refer to the printed version that was delivered with your vehicle. ddd2009-001...

  • Page 112: Specifications

    SPECIFICATIONS DS 90 MODEL DS 90 X ENGINE Type 4-stroke, forced air cooled Number of cylinders Single horizontal cylinder Displacement 89.53 cm³ (5.5 in³) Electric/kick start Starting For the summer season, use 4-STROKE SYNTH. BLEND OIL (SUMMER) (P/N 293 600 121)
  • Page 113 DS 90 X: Double A-arm Type Rear Rigid swing arm 86 mm (3.4 in) Front DS 90 X: 178 mm (7 in) Travel 160 mm (6.3 in) Rear DS 90 X: 229 mm (9 in) Shock absorber DS 90 X: HPG...
  • Page 114 70 kg (150 lb) 152 cm (59.8 in) Overall length 91 cm (35.8 in) Overall width DS 90 X: 111 cm (43.7 in) 93.5 cm (36.8 in) Overall height DS 90 X: 97 cm (38.2 in) 100 cm (39.4 in) Wheelbase DS 90 X: 102.4 cm (40.3 in)

  • Page 115: Troubleshooting

    TROUBLESHOOTING ______________...

  • Page 116: Troubleshooting Guidelines

    3. Weak battery or loose connections. – Check connections and condition of terminals. – Have the battery checked. – Contact an authorized Can-Am dealer. ENGINE TURNS OVER BUT FAILS TO START 1. Emergency engine stop switch is in the OFF position.
  • Page 117 • Apply parking brake and stop engine. • Let engine cool down. • See an authorized Can-Am dealer as soon as possible. – If overheating persists, contact an authorized Can-Am dealer. 5. Air filter/box clogged or dirty. – Check air filter and clean. If necessary replace air filter.
  • Page 118 TROUBLESHOOTING GUIDELINES ENGINE BACKFIRE 1. Exhaust system leakage. – Contact an authorized Can-Am dealer. 2. Engine is running too hot. – See ENGINE LACKS ACCELERATION OR POWER. 3. Ignition timing is incorrect or there is an ignition system failure. – Contact an authorized Can-Am dealer.

  • Page 119: Warranty

    WARRANTY ______________...

  • Page 120: Brp International Limited Warranty: 2015 Can-Am

    All genuine Can-Am ATV parts and accessories, installed by an authorized Can-Am ATV Distributor/Dealer at the time of delivery of the 2015 Can-Am ATV, carry the same warranty as that of the Can-Am ATV.
  • Page 121 Can-Am ATV Distributor/Dealer; – Damage caused by abuse, abnormal use, neglect, racing or operation of the product in a manner inconsistent with the recommended operation described in the Operator’s Guide;...
  • Page 122 This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2015 Can-Am ATV must be purchased as new and unused by its first owner from a Can-Am ATV Distributor/Dealer authorized to distribute Can-Am ATVs in the country in which the sale occurred;...
  • Page 123 BRP's responsibility is limited to making the required repairs or replace- ments of parts. No claim of breach of warranty shall be cause for cancellation or rescission of the sale of the Can-Am ATV to the owner. You may have other legal rights which may vary from country to country.
  • Page 124 For all other countries, please contact your local Can-Am ATV Distributor/Dealer (visit our website at www.brp.com for contact information), or contact our North American office at: BOMBARDIER RECREATIONAL PRODUCTS INC. Customer Assistance Center 75 J.-A. Bombardier Street Sherbrooke QC J1L 1W3 Canada Tel.: 1 819 566-3366...

  • Page 125: Brp Limited Warranty For The European Economic Areas, The Commonwealth Of The Independent States And Turkey: 2015 Can-Am Tm Atv

    All genuine Can-Am ATV parts and accessories, installed by an authorized Can-Am ATV Distributor/Dealer at the time of delivery of the 2015 Can-Am ATV, carry the same warranty as that of the ATV. This limited warranty will become null and void if: (1) The ATV was used for racing or any other competitive activity, at any point, even by a previous owner;...
  • Page 126 Can-Am ATV Distributor/Dealer; – Damage caused by abuse, abnormal use, neglect, racing or operation of the product in a manner inconsistent with the recommended operation described in the Operator’s Guide;...
  • Page 127 This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2015 Can-Am ATV must be purchased as new and unused by its first owner from a Can-Am ATV Distributor/Dealer authorized to distribute Can-Am ATVs in the country in which the sale occurred;...
  • Page 128 BRP or an authorized Can-Am ATV Distributor/Dealer receives a proof that the former owner agreed to the transfer of ownership, in addition to the co-or- dinates of the new owner.
  • Page 129 9) CONSUMER ASSISTANCE 1. In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the Can-Am ATV Distributor/Dealer level. We recommend discussing the issue with the autho- rized Can-Am ATV Distributor/Dealer's service manager or owner.
  • Page 130 ADDITIONAL TERMS AND CONDITIONS FOR FRANCE ONLY The following terms and conditions are applicable to products sold in France only: The seller shall deliver goods that are complying with the contract and shall be re- sponsible for defects existing upon delivery. The seller shall also be responsible for defects resulting from packaging, assembling instructions or the installation when it is its responsibility per the contract or if accomplished under its responsibility.

  • Page 131: Customer Information

    CUSTOMER INFORMATION ______________...

  • Page 132: Privacy Information

    PRIVACY INFORMATION BRP wishes to inform you that your coordinates will be used for safety and war- ranty related purposes. Furthermore, BRP and its affiliates may use its customer list to distribute marketing and promotional information about BRP and related products.

  • Page 133: Change Of Address/Ownership

    STOLEN UNITS: If your personal ATV is stolen, you should notify BRP or an autho- rized Can-Am dealer. We will ask you to provide your name, address, phone num- ber, the vehicle identification number and the date it was stolen.
  • Page 134 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank ______________...
  • Page 135 CHANGE OF ADDRESS/OWNERSHIP ______________...
  • Page 136 CHANGE OF ADDRESS/OWNERSHIP ______________...
  • Page 137 CHANGE OF ADDRESS/OWNERSHIP ______________...
  • Page 138 CHANGE OF ADDRESS/OWNERSHIP ______________...
  • Page 139 ATV MODEL No. VEHICLE IDENTIFICATION NUMBER (V.I.N.) ENGINE IDENTIFICATION NUMBER (E.I.N.) Owner: NAME STREET CITY STATE/PROVINCE ZIP/POSTAL CODE Purchase Date YEAR MONTH Warranty Expiry Date YEAR MONTH To be completed by the dealer at the time of the sale. DEALER IMPRINT AREA Please verify with your dealer to ensure your vehicle has been registered with BRP.
  • Page 140 OPERATOR’S GUIDE DS 70, DS 90, DS 90 X / ENGLISH 219 001 567 GUIDE DU CONDUCTEUR DS 70, DS 90, DS 90 X / ANGLAIS OPERATOR’S GUIDE DS 70, DS 90, DS 90 X / ENGLISH GUIDE DU CONDUCTEUR DS 70, DS 90, DS 90 X / ANGLAIS FAIT AU / MADE IN VIETNAM U/M:P.C.

This manual is also suitable for:

Ds 90 x

Table of Contents

Save PDF