Show Qos Shared-Policy-Instance (Bng) - Cisco ASR 9000 Series Command Reference Manual

show qos shared-policy-instance (BNG)

show qos shared-policy-instance (BNG)
To list interface details for a specific location of a specific shared policy instance, attached to either an input
or output interface, use the show qos shared-policy-instance command in EXEC mode.
show qos shared-policy-instance instance-name {input| output} location node-id
Syntax Description
instance-name
input
output
location node-id
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 3.7.2
Release 3.9.0
Release 4.3.0
Release 5.1.1
Usage Guidelines
To enter the dynamic template configuration mode, run dynamic-template command in the Global
Configuration mode
Task ID
Task ID
qos
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
504
String of up to 32 characters to identify the shared policy instance.
Displays details for the shared policy instance attached to the input interface.
Displays details for the shared policy instance attached to the output interface
Location of node. The node-id argument is entered in rack/slot/module
notation.
Modification
This command was introduced.
This command was updated to support shared policy instance over
bundle interfaces.
The command was supported in BNG.
This command was updated to support SPI over PW-Ether subinterface.
Operations
read, write
QOS Commands