Show Ipsubscriber Summary - Cisco ASR 9000 Series Command Reference Manual

IPoE Commands

show ipsubscriber summary

To display the summary information for the IP subscriber interfaces, use the show ipsubscriber summary
command in the EXEC mode.
show ipsubscriber summary location location
Syntax Description
location
location
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
network
Examples This is the sample output of the show ipsubscriber summary command:
RP/0/RSP0/CPU0:router# show ipsubscriber summary
IPSUB Summary for all nodes
Interface Counts:
Invalid:
Initialized:
Session creation started:
Control-policy executing:
Control-policy executed:
Session features applied:
VRF configured:
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Specifies the IP subscriber location.
Specifies the fully qualified location specification.
Modification
This command was introduced.
Operation
read
DHCP Pkt Trigger
---------- ------------
0 0
0 0
0 0
0 0
0 0
0 0
0 0
show ipsubscriber summary
5.2.x
293