show ppp summary
show ppp summary
To display the summary information for the PPP interfaces, use the show ppp summary command in EXEC
mode.
show ppp summary location location
Syntax Description
location
location
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
Task ID
ppp
Examples
This example shows the output of the show ppp summary command for interfaces running PPP:
RP/0/RSP0/CPU0:router# show ppp summary location 0/5/CPU0
====================================
Interfaces running PPP
====================================
POS
Serial
PPPoE
Multilink Bundles
----------------------------
Total
====================================
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
408
Displays the PPP summary for interfaces at a location.
Specifies the location details.
Modification
This command was introduced.
Operation
read
0
200
10000
100
10300
BNG PPP Commands