Ppp Ipcp - Cisco ASR 9000 Series Command Reference Manual

BNG PPP Commands

ppp ipcp

To set Internet Protocol Control Protocol (IPCP) negotiation options, use the ppp ipcp command in the
dynamic template configuration mode. To disable this feature, use the no form of this command.
ppp ipcp [ dns{ primary_ip_address| secondary_ip_address } | mask peer_netmask_address | peer-address{
default| peer_ipaddress| pool| pool_name } | renegotiation ignore | wins |primary_ipaddress
|secondary_ipaddress ]
no ppp ipcp
Syntax Description
dns
primary_ip_address
secondary_ip_address
mask
peer_netmask_address
peer-address
default
peer_ipaddress
pool
pool_name
renegotiation
wins
Command Default
None
Command Modes
Dynamic template configuration
Command History
Release
Release 4.2.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Configures the dns options.
Specifies the primary DNS IP addresses.
Specifies the secondary DNS IP addresses.
Specifies the IPv4 netmask to use for the peer.
Specifies the peer netmask address.
Specifies the change in peer-address configuration.
Specifies the default peer IP address.
Specifies the peer IP address.
Configures the pool options.
Specifies the pool name.
Specifies the peer negotiation options.
Specifies the WINS options.
Modification
This command was introduced.
ppp ipcp
5.2.x
383