Accounting Aaa List - Cisco ASR 9000 Series Command Reference Manual

BNG AAA Commands

accounting aaa list

To configure the subscriber accounting feature, use the accounting aaa list command in the dynamic template
configuration mode. To disable this feature, use the no form of this command.
accounting aaa list {method_list_name| default} type session {dual-stack-delay time| periodic-interval
time}
no accounting aaa list {method_list_name| default} type session {dual-stack-delay time| periodic-interval
time}
Syntax Description
method_list_name
default
type
session
dual-stack-delay
time
periodic-interval
time
Command Default
None
Command Modes
Dynamic template configuration
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the dynamic-template command to enter dynamic template configuration mode.
Specifies the preconfigured method list name.
Specifies the default method list.
Specifies the type of accounting performed.
Applies the accounting to a session.
Specifies the dual stack set delay wait in seconds.
Specifies the value of the dual stack delay time in seconds. The value
ranges from 1-30.
Specifies the periodic accounting interval in minutes.
Specifies the value of the periodic accounting interval in minutes. The
value ranges from 1-65535.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
accounting aaa list
5.2.x
27