Excessive Punt Flow Trap Commands
This module describes the Cisco IOS XR software commands used to configure the Excessive Punt Flow
Trap commands for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details
regarding the related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router
Broadband Network Gateway Configuration Guide.
•
lpts punt excessive-flow-trap, page 252
•
lpts punt excessive-flow-trap dampening , page 254
•
lpts punt excessive-flow-trap penalty-rate, page 255
•
lpts punt excessive-flow-trap penalty-timeout, page 257
•
lpts punt excessive-flow-trap subscriber-interfaces, page 259
•
show lpts punt excessive-flow-trap, page 260
•
show lpts punt excessive-flow-trap information, page 263
•
show lpts punt excessive-flow-trap interface, page 266
•
show lpts punt excessive-flow-trap protocol, page 269
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
251