Address Pool Service Commands
show pool vrf
To show the status of VRF pool, use the show pool vrf command in the EXEC mode.
show pool vrf vrf_name{ipv4|ipv6}
Syntax Description
vrf_name
all
ipv4
ipv6
|
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Use the pool ipv4 command to enter IPv4 pool configuration submode and pool ipv6 command to enter IPv6
pool configuration submode.
Task ID
Task ID
ip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Specifies the vrf name.
Displays all vrfs.
Specifies the IPv4 pool.
Specifies the IPv6 pool.
Specifies the output modifiers.
Modification
This command was introduced.
Support for IPv6 was added.
Operation
read
show pool vrf
5.2.x
109