Interface Subscriber-Pppoe Profile - Cisco ASR 9000 Series Command Reference Manual

interface subscriber-pppoe profile

interface subscriber-pppoe profile
To enable the PPPoE subscribers to use a profile for all the PPPoE subscribers, use the interface
subscriber-pppoe profile command in the DHCP IPv6 configuration mode. To disable this feature, use the
no form of this command.
interface subscriber-pppoe profile profile_name
no interface subscriber-pppoe profile profile_name
Syntax Description
profile_name
Command Default
VRF is disabled.
Command Modes
DHCP IPv6 configuration
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples This is an example for enabling PPPoE subscribers to use the "my-def-pppoe-green" profile for all the PPPoE
subscribers using the interface subscriber-pppoe profile command:
RP/0/RSP0/CPU0:router(config)# dhcp ipv6
RP/0/RSP0/CPU0:router(config-dhcpv6)# interface subscriber-pppoe profile my-def-pppoe-green
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
164
Specifies the name of the profile.
Modification
This command was introduced.
Operations
read, write
BNG DHCP Commands