Control Policy Commands
Examples
This is an example of configuring the activate command in the Global Configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# policy-map type control subscriber PL1
RP/0/RSP0/CPU0:router(config-pmap)# event session-activate match-first
RP/0/RSP0/CPU0:router(config-pmap-e)# class type control subscriber CL2
RP/0/RSP0/CPU0:router(config-pmap-c)# 1 activate dynamic-template DL1 aaa list default
Related Commands
Command
deactivate, on page 122
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Description
Deactivates the dynamic template mode in the class
map sub-configuration mode.
activate
5.2.x
115