Radius-Server Dead-Criteria - Cisco ASR 9000 Series Command Reference Manual

BNG AAA Commands

radius-server dead-criteria

To configure the dead server detection criteria for a configured RADIUS server, use the radius-server
dead-criteria command in the Global Configuration mode. To disable the Radius server dead-criteria, use
the no form of this command.
radius-server dead-criteria {time value| tries number_of_tries}
no radius-server dead-criteria {time value| tries number_of_tries}
Syntax Description
time
value
tries
number_of_tries
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
aaa
Specifies the minimum time that must elapse since a response was received from
this RADIUS server.
Specifies the time in seconds. The value ranges from 1 to 120.
Specifies the minimum number of transmissions (original attempts plus
retransmits) to this RADIUS server.
Specifies the number of tries. The range is from 1 to 100.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operations
read, write
radius-server dead-criteria
5.2.x
33