Template (Bng) - Cisco ASR 9000 Series Command Reference Manual

template (BNG)

template (BNG)
To configure the VPDN template and enter the vpdn template configuration mode, use the template command
in vpdn configuration mode. To disable vpdn template, use the no form of this command.
template vpdn-template_name{description| caller-id| ip| dsl-line-forwarding| ipv4| l2tp-class| tunnel| vpn}
no template
Syntax Description
vpdn-template_name
description
caller-id
ip
dsl-line-forwarding
ipv4
l2tp-class
tunnel
vpn
Command Default
None
Command Modes
VPDN configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the vpdn command, to enter vpdn configuration submode.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
420
Specifies the vpdn template name.
Specifies the description of the vpdn template.
Specifies the options to apply on calling station id.
Specifies the tos ip value.
Enables dsl line information forwarding.
Specifies the ipv4 settings for tunnel.
Specifies the l2tp class name.
Specifies the l2tp tunnel commands.
Specifies the vpn id/vrf name.
Modification
This command was introduced.
PPPoE LAC-Specific Commands