show pppoe throttles
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
Task ID
ppp
Examples
This is the sample output of the show pppoe throttles command:
RP/0/RSP0/CPU0:router# show pppoe throttles location 0/2/cpu0
BBA-Group TEST
--------------
MAC throttle information:
Max packets per request period: 5
Request period duration: 20s
Blocking period duration: 5s
Time Since
MAC Address State left reset PADI PADR
----------- ----- ---- ----- ---- ----
aabb.ccdd.1123 Idle 30s 16s 0 0
7582.1352.e29a Monitor 3s 20s 5 5
7582.1352.e29a Block 4s 17s 6 5
MAC Access-interface throttle information:
Max packets per request period: 5
Request period duration: 20s
Blocking period duration: 5s
Time Since
Access-Int MAC Address State left reset PADI PADR
---------- ----------- ----- ---- ----- ---- ----
GE0/1/0/0 aabb.ccdd.1123 Idle 30s 16s 0 0
GE0/1/0/0 7582.1352.e29a Monitor 3s 20s 5 5
GE0/1/0/0 7582.1352.e29a Block 4s 17s 6 5
MAC IWF throttle information:
Max packets per request period: 5
Request period duration: 20s
Blocking period duration: 5s
Time Since
MAC Address State left reset PADI PADR
----------- ----- ---- ----- ---- ----
aabb.ccdd.1123 Idle 30s 16s 0 0
7582.1352.e29a Mon 3s 20s 5 5
7582.1352.e29a Block 4s 17s 6 5
BBA-Group TEST2
--------------
MAC throttling is not configured.
MAC Access-interface throttling is not configured.
MAC IWF throttling is not configured.
Another sample output of the show pppoe throttles command:
RP/0/RSP0/CPU0:router# show pppoe throttles
BBA-Group BNG_BBA1
------------------
MAC throttles not configured.
MAC-Access-interface throttles not configured.
MAC-IWF-Access-interface throttles not configured.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
476
Operation
read
PPPoE Commands