Cisco ASR 9000 Series Command Reference Manual page 330

show ipv4 traffic (BNG)
Bcast: 0 sent, 0 received
Mcast: 0 sent, 0 received
Drop: 0 encapsulation failed, 0 no route, 0 too big, 0 sanity address check
Sent: 16372 total
ICMP statistics:
Sent: 0 admin unreachable, 0 network unreachable
Rcvd: 0 admin unreachable, 0 network unreachable
UDP statistics:
TCP statistics:
This table describes the significant fields shown in the display.
Table 19: show ipv4 traffic Command Field Descriptions
Field
bad hop count
encapsulation failed
format errors
IP statistics Rcvd total
no route
4 TTL = time-to-live
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
316
0 host unreachable, 0 protocol unreachable
0 port unreachable, 0 fragment unreachable
0 time to live exceeded, 0 reassembly ttl exceeded
5 echo request, 0 echo reply
0 mask request, 0 mask reply
0 parameter error, 0 redirects
5 total
2 host unreachable, 0 protocol unreachable
0 port unreachable, 0 fragment unreachable
0 time to live exceeded, 0 reassembly ttl exceeded
0 echo request, 5 echo reply
0 mask request, 0 mask reply
0 redirect, 0 parameter error
0 source quench, 0 timestamp, 0 timestamp reply
0 router advertisement, 0 router solicitation
7 total, 0 checksum errors, 0 unknown
16365 packets input, 16367 packets output
0 checksum errors, 0 no port
0 forwarded broadcasts
0 packets input, 0 packets output
0 checksum errors, 0 no port
Description
Occurs when a packet is discarded because its TTL
field was decremented to zero.
Usually indicates that the router had no ARP request
entry and therefore did not send a datagram.
Indicates a gross error in the packet format, such as
an impossible Internet header length.
Indicates the total number of local destination and
other packets received in the software plane. It does
not account for the IP packets forwarded or discarded
in hardware.
Counted when the Cisco IOS XR software discards
a datagram it did not know how to route.
IPv4 and IPv6 Commands
4