Show Dhcp Ipv6 Proxy Profile - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

show dhcp ipv6 proxy profile

To display the proxy profile information for Dynamic Host Configuration Protocol (DHCP) proxy, use the
show dhcp ipv6 proxy profile command in EXEC mode.
show dhcp ipv6 proxy profile name profile_name{location| location}
Syntax Description
name
profile_name
location
location
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples
This is a sample output from the show dhcp ipv6 proxy profile command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 proxy profile
Tue Sep
DHCP IPv6 Proxy Profiles
--------------------------
Displays the detailed proxy profile information for the profile.
Specifies the name of the profile.
Displays the node location by Interface.
Displays the fully qualified location specification of an interface.
4 05:00:57.938 UTC
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read
show dhcp ipv6 proxy profile
5.2.x
209