Radius-Server Throttle - Cisco ASR 9000 Series Command Reference Manual

BNG AAA Commands

radius-server throttle

To configure RADIUS throttling options for access and accounting to flow control the number of access and
accounting requests sent to a RADIUS server, use the radius-server throttle command in the Global
Configuration mode. To disable the radius server throttle, use the no form of this command.
radius-server throttle {access value {access-timeout time| accounting value}| accounting acc_value}
no radius-server throttle {access value {access-timeout time| accounting value}| accounting acc_value}
Syntax Description
access
value
access-timeout
time
accounting
acc_value
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
aaa
Controls the number of access requests sent to a radius server.
Specifies the number of outstanding access requests after which throttling should
be performed. The value ranges from 0 to 65535 and the preferred value 100.
Specifies the number of timeouts exceeding which a throttled access request is
dropped.
Specifies the number of timeouts for a transaction. The default value is 3.
Controls the number of accounting requests sent to a radius server.
Specifies the number of outstanding accounting transactions after which throttling
should be performed. The value ranges from 0 to 65535 and the preferred value
100.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
radius-server throttle
5.2.x
51