Show Dhcp Ipv6 Server Profile - Cisco ASR 9000 Series Command Reference Manual

show dhcp ipv6 server profile

show dhcp ipv6 server profile
To display the server profile information for Dynamic Host Configuration Protocol (DHCP) server, use the
show dhcp ipv6 server profile command in EXEC mode.
show dhcp ipv6 server profile name profile_name{location| location}
Syntax Description
name
profile_name
location
location
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples
This is a sample output from the show dhcp ipv6 server profile command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 server profile name test
Tue Sep
Profile: test
DNS Addresses:None
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
218
Displays the detailed proxy profile information for the profile.
Specifies the name of the profile.
Displays the node location by Interface.
Displays the fully qualified location specification of an interface.
4 05:00:57.938 UTC
Modification
This command was introduced.
Operation
read
BNG DHCP Commands