Pado Delay Remote-Id - Cisco ASR 9000 Series Command Reference Manual

pado delay remote-id

pado delay remote-id
To set a delay for a PPPoE Active Discovery Offer (PADO) message for a particular PPPoE BBA-Group,
based on the Remote-ID received in PPPoE Active Discovery Initiator (PADI) message, use the pado delay
remote-id command in PPPoE BBA-Group configuration mode. To disable the PADO delay configuration
based on the Remote-ID, use the no form of this command.
pado delay remote-id {delay | {string | contains} string delay}
no pado delay remote-id {delay | {string | contains} string delay}
Syntax Description
delay
string
contains
string
Command Default
None
Command Modes
PPPoE BBA-Group configuration
Command History
Release
Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
446
Delay value for PADO message, in milliseconds,
based on the Remote-ID.
The range is from 0 to 10000.
Delays the PADO message, when the Remote-ID
received in PADI message matches the configured
string.
Delays the PADO message, when the Remote-ID
received in PADI message contains the configured
string.
String received in PADI message, that needs to be
matching the Remote-ID (when used along with
string keyword) or the string received in PADI
message, that needs to be contained within the
Remote-ID (when used along with the contains
keyword).
Modification
This command was introduced.
PPPoE Commands