Deploying the Quality of Service (QoS)
Command or Action
Step 4
qos-account [ AAL5| user-defined ] [ mux-1483routed | mux-dot1q-rbe
| mux-pppoa | mux-rbe | snap-1483routed | snap-dot1q-rbe | snap-ppoa |
snap-rbe ]
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# qos-account
AAL5 snap-rbe
Step 5
exit
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# exit
Step 6
Use the commit or end command.
Configuring QoS Accounting: An example
configure
dynamic-template type ppp p1
qos account AAL5
service-policy input input_1
end
QoS Features Supported on BNG
BNG supports these QoS features:
OL-26148-02
mux-1483routed
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
QoS Features Supported on BNG
Purpose
• Service
Defines the L2 QoS overhead accounting.
Various keywords such as mux-1483routed,
snap-rbe define different available
encapsulations between the DSLAM and
CPE.
For details about keywords, see
ATM Overhead Encapsulation Details, on
page
119.
Exits from the current mode.
commit—Saves the configuration changes
and remains within the configuration session.
end—Prompts user to take one of these
actions:
• Yes— Saves configuration changes and
exits the configuration session.
• No—Exits the configuration session
without committing the configuration
changes.
• Cancel—Remains in the configuration
mode, without committing the
configuration changes.
4.2.x
Table 2:
121