Encapsulation Ambiguous Dot1Ad - Cisco ASR 9000 Series Command Reference Manual

encapsulation ambiguous dot1ad

encapsulation ambiguous dot1ad
To configure encapsulated ambiguous VLANs with IEEE 802.1ad Provider Bridging (PB) encapsulation type
on an access-interface, use the encapsulation ambiguous dot1ad command in the interface configuration
mode. To remove the encapsulated ambiguous VLANs, use the no form of this command.
encapsulation ambiguous dot1ad {any | vlan-id | vlan-range} [dot1q {any | vlan-range}]
no encapsulation ambiguous
Syntax Description
any
vlan-id
vlan-range
dot1q
Command Default
None
Command Modes
Interface configuration
Command History
Release
Release 4.2.0
Release 5.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The valid combinations of ambiguous VLAN configurations in BNG, with IEEE 802.1ad Provider Bridging
(PB) encapsulation type are:
• encapsulation ambiguous dot1ad {any | vlan-range }
• encapsulation ambiguous dot1ad vlan-id dot1q { any | vlan-range }
• encapsulation ambiguous dot1ad vlan-range dot1q any
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
224
Specifies the matching criteria as any VLAN tag in the range 1 to 4094.
VLAN-ID for the outer VLAN.
VLAN range for the outer and inner VLANs.
The range is given in comma-separated, or hyphen-separated format, or a
combination of both.
Indicates that the IEEE 802.1q standard encapsulation type is used for the inner
tag.
Modification
This command was introduced.
The support for outer VLAN range was added in BNG.
BNG Interface Commands