Show Ppp Interfaces (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG PPP Commands

show ppp interfaces (BNG)

To display PPP state information for an interface, use the show ppp interfaces command in EXEC mode.
show ppp interfaces [brief| detail] {all| type interface-path-id| location node-id}
Syntax Description
brief
detail
type
interface-path-id
all
location node-id
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
Release
Release 3.9.0
Release 4.2.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
(Optional) Displays brief output for all interfaces on
the router, for a specific POS interface instance, or
for all interfaces on a specific node.
(Optional) Displays detailed output for all interfaces
on the router, for a specific interface instance, or for
all interfaces on a specific node.
Interface type. For more information, use the question
mark (?) online help function.
Physical interface or virtual interface.
Use the show interfaces command to see a
Note
list of all interfaces currently configured on
the router.
For more information about the syntax for the router,
use the question mark (?) online help function.
(Optional) Displays detailed PPP information for all
nodes.
(Optional) Displays detailed PPP information for the
designated node. The node-id argument is entered in
the rack/slot/module notation.
Modification
This command was introduced.
This command was supported in the dynamic template configuration
mode for BNG.
show ppp interfaces (BNG)
5.2.x
397