L2Tp-Class - Cisco ASR 9000 Series Command Reference Manual

l2tp-class

l2tp-class
To create the l2tp class that needs to be used for L2TP parameters for the vpdn-group and to enter the l2tp
class configuration submode, use the l2tp-class command in Global Configuration mode. To disable this
feature, use the no form of this command.
l2tp-class {c1 | l1 | l2tp_class_name } [ authentication | congestion-control | digest | hello-interval | hidden
| hostname | ip | password | receive-window | retransmit | security | timeout | tunnel ]
no l2tp-class
c1
l1
l2tp_class_name
authentication
congestion-control
digest
hello-interval
hidden
hostname
ip
password
receive-window
retransmit
security
timeout
tunnel
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
412
PPPoE LAC-Specific Commands
Specifies the l2tp class name.
Specifies the l2tp class name.
Specifies the l2tp class name.
Authenticates the L2TP control connection.
Enables L2Tp congestion control.
Specifies message digest configuration for L2TPv3
control connection.
Hides AVPs in outgoing control messages.
Sets HELLO message interval.
Specifies the local hostname for control connection
authentication.
Specifies the settings for tunnel.
Specifies the password for control connection
authentication.
Receives the window size for control connection.
Specifies the control message retransmission
parameters.
Specifies the L2TP security command.
Specifies the control connection timeout parameters.
Specifies the tunnel settings.