Service-Policy Type Control Subscriber - Cisco ASR 9000 Series Command Reference Manual

Control Policy Commands

service-policy type control subscriber

To associate a subscriber control service policy to the interface, use the service-policy type control subscriber
command in interface configuration mode. To disable the service-policy type control subscriber, use the no
form of this command.
service-policy type control subscriber name
no service-policy type control subscriber name
Syntax Description
name
Command Default
None
Command Modes
Interface configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
config-services
Examples This is an example of configuring the service-policy type control subscriber command in interface
configuration mode:
RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 344
RP/0/RSP0/CPU0:router(config-if)# service-policy type control subscriber sub1
Related Commands
Command
class-map type control subscriber, on page 120
Represents the policy map name.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
service-policy type control subscriber
Modification
This command was introduced.
Operation
read, write
Description
Enables the class-map.
5.2.x
133