Aaa Radius Attribute Nas-Port-Type - Cisco ASR 9000 Series Command Reference Manual

BNG AAA Commands

aaa radius attribute nas-port-type

To configure the AAA RADIUS attribute nas-port-type for a physical interface or a VLAN sub-interface, use
the aaa radius attribute nas-port-type command in the interface configuration mode. To remove the
configuration of nas-port-type from the interface or VLAN sub-interface, use the no form of this command.
aaa radius attribute nas-port-type {value | string}
no aaa radius attribute nas-port-type
Syntax Description
value
string
Command Default
None
Command Modes
Interface or VLAN sub-interface configuration
Command History
Release
Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The permissible values for nas-port-type within the given range are 0 - 6, 9, 15 and 30 - 44.
Task ID
Task ID
aaa
Examples This example shows how to configure the AAA RADIUS attribute, nas-port-type for each physical interface
:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface gigabitEthernet 0/0/0/0
RP/0/RSP0/CPU0:router(config-if)# aaa radius attribute nas-port-type 15
The nas-port-type value for the interface or VLAN sub-interface.
The range is from 0 to 44.
The nas-port-type name for the interface or VLAN sub-interface.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
aaa radius attribute nas-port-type
5.2.x
25