Aaa Group Server Radius (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG AAA Commands

aaa group server radius (BNG)

To configure a group server radius, use the aaa group server radius command in Global Configuration mode.
To disable this AAA group server radius, use the no form of this command.
aaa group server radius sever_group_name [accounting | authorization | deadtime | load-balance | server
| server-private | source-interface | throttle | vrf]
no aaa group server radius sever_group_name [accounting | authorization | deadtime | load-balance |
server | server-private | source-interface | throttle | vrf]
Syntax Description
server_group_name
accounting
authorization
deadtime
load-balance
server
server-private
source-interface
throttle
vrf
Command Default
None
Command Modes
Global Configuration mode
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
aaa group server radius (BNG)
Specifies the AAA group server RADIUS name.
Specifies a RADIUS attribute filter for accounting.
Specifies a RADIUS attribute filter for authorization.
Specifies the time in minutes after which a RADIUS
server will be marked up after it has gone dead.
Specifies the radius load-balancing options.
Specifies the RADIUS server.
Accepts IP address (IPv4) or hostname of the RADIUS
server. The hostname option is supported only for
IPv4 domain address.
Specifies a private RADIUS server.
Accepts IP address (IPv4) or hostname of the RADIUS
server. The hostname option is supported only for
IPv4 domain address.
Specifies interface for source address in RADIUS
packet.
Specifies RADIUS throttling options.
Specifies the VRF to which the server group belongs.
5.2.x
15