Prefix-Pool - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

prefix-pool

To specify the name of prefix pool by integrating the DHCPv6 sever with distributed address pool service
(DAPS), use the prefix-pool command in the DHCP IPv6 server profile class configuration mode. To remove
the prefix pool name, use the no form of this command.
prefix-pool pool_name
no prefix-pool pool_name
Syntax Description
pool_name
Command Default
When a DHCP for IPv6 pool is first created, no DNS IPv6 servers are configured.
Command Modes
DHCP IPv6 server profile class configuration
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To enter the DHCP IPv6 server profile configuration, enter profile profile_name server command in the
DHCPv6 configuration mode.
To enter the DHCP IPv6 server profile class configuration, enter class class_name command in the DHCPv6
server profile configuration mode.
Task ID
Task ID
ip-services
Examples This is an example of creating a prefix-pool name using the prefix-pool command:
RP/0/RSP0/CPU0:router(config)# dhcp ipv6
RP/0/RSP0/CPU0:router(config-dhcpv6)# profile my_profile server
RP/0/RSP0/CPU0:router(config-dhcpv6-server-profile)# class class_dhcp
RP/0/RSP0/CPU0:router(config-dhcpv6-server-profile-class)# prefix-pool pool1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Specifies the name of a prefix pool.
Modification
This command was introduced.
Operations
read, write
prefix-pool
5.2.x
179