Test Radius Coa Activate - Cisco ASR 9000 Series Command Reference Manual

test radius coa activate

test radius coa activate
To enable Traffic Mirroring, also known as Switch Port Analyzer (SPAN), on a BNG subscriber interface,
use the test radius coa activate command in EXEC mode. To disable SPAN, use the deactivate form of this
command.
test radius coa activate service name acct-ses-id id
test radius coa deactivate service name acct-ses-id id
Syntax Description
service
name
acct-ses-id
id
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Configure monitor sessions (using monitor-session command in Global Configuration mode) and configure
source interface attachment to a monitor session (using dynamic templates), as a pre-requisite for executing
test radius coa activate command.
Task ID
Task ID
network
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
244
Specifies the service to be activated or de-activated.
Name of the service, which is same as the dynamic-template name.
Specifies the accounting session ID of the subscriber on which the template is
to be activated or de-activated.
ID of the accounting session, in hexadecimal format .
Modification
This command was introduced.
Operation
read, write
Dynamic Template Commands