Show Ipv6 Neighbors (Bng) - Cisco ASR 9000 Series Command Reference Manual

show ipv6 neighbors (BNG)

show ipv6 neighbors (BNG)
To display the IPv6 neighbor discovery cache information, use the show ipv6 neighbors command in the
EXEC mode.
show ipv6 neighbors [type interface-path-id| location node-id]
Syntax Description
type
interface-path-id
location node-id
Command Default
All IPv6 neighbor discovery cache information is displayed.
Command Modes
Command History
Release
Release 3.7.2
Release 4.3.0
Usage Guidelines
When the interface-type and interface-number arguments are not specified, cache information for all IPv6
neighbors is displayed. Specifying the interface-type and interface-number arguments displays only cache
information about the specified interface.
Task ID
Task ID
ipv6
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
322
(Optional) Interface type. For more information, use the question mark (?) online
help function.
(Optional) Physical interface instance or a virtual interface.
Use the show interfaces command to see a list of all interfaces currently
Note
configured on the router.
For more information about the syntax for the router, use the question mark (?)
online help function.
(Optional) Designates a node. The node-id argument is entered in the
rack/slot/module notation.
Modification
This command was introduced.
This command was supported for BNG.
Operations
read
IPv4 and IPv6 Commands