Ipv6 Nd Nud-Enable - Cisco ASR 9000 Series Command Reference Manual

ipv6 nd nud-enable

ipv6 nd nud-enable
To enable the IPv6 neighbor un-reachability detection (NUD), use the ipv6 nd nud-enable command in the
dynamic template configuration mode. To disable IPv6 NUD, use the no form of this command.
ipv6 nd nud-enable
no ipv6 nd nud-enable
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Dynamic template configuration
Command History
Release
Release 4.3.0
Usage Guidelines
You must be in a user group associated with a task group that includes the proper task IDs. The command
reference guides include the task IDs required for each command. If you suspect user group assignment is
preventing you from using a command, contact your AAA administrator for assistance.
Task ID
Task ID
config-services
Examples This example shows how to enable IPv6 neighbor un-reachability detection in dynamic template configuration
mode:
RP/0/RSP0/CPU0:router(config)# dynamic-template type ppp p1
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# ipv6 nd nud-enable
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
362
Modification
This command was introduced.
Operation
read, write
Neighbor Discovery Commands