Ipsubscriber Interface - Cisco ASR 9000 Series Command Reference Manual

ipsubscriber interface

ipsubscriber interface
To enable interface based static session in BNG, use the ipsubscriber interface command in the interface
configuration mode. To remove the static session, use the no form of this command.
ipsubscriber interface
no ipsubscriber interface
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Interface configuration
Command History
Release
Release 5.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
network
Examples This example shows how to enable interface based static session in BNG:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface bundle-ether 1.1
RP/0/RSP0/CPU0:router(config-subif)# ipsubscriber interface
Related Commands
Command
show subscriber manager sadb, on page 547
show ipsubscriber access-interface, on page 286
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
278
Modification
This command was introduced.
Operation
read, write
Description
Displays the subscriber management feature attribute
database information.
Shows the access interface information for IP subscriber.
IPoE Commands