Ppp Max-Failure (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG PPP Commands

ppp max-failure (BNG)

To configure the maximum number of consecutive Configure Negative Acknowledgments (CONFNAKs) to
permit before terminating a negotiation, use the ppp max-failure command in an appropriate configuration
mode. To disable the maximum number of CONFNAKs and return to the default, use the no form of this
command.
ppp max-failure retries
no ppp max-failure
Syntax Description
retries
Command Default
retries: 5
Command Modes
Dynamic template configuration
Command History
Release
Release 3.9.0
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To enter the dynamic template configuration mode, run dynamic-template command in the Global
Configuration mode.
Task ID
Task ID
ppp
aaa
Maximum number of CONFNAKs to permit before terminating a negotiation. Range
is from 2 to 10. Default is 5.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
This command was supported in the dynamic template configuration
mode for BNG.
Operations
read, write
read, write
ppp max-failure (BNG)
5.2.x
391