Pppoe In-Flight-Window - Cisco ASR 9000 Series Command Reference Manual

PPPoE Commands

pppoe in-flight-window

To configure a limit for the number of PPPoE sessions that are in progression towards established state in
BNG, use the pppoe in-flight-window command in Global Configuration mode. To remove this limit, use
the no form of this command.
pppoe in-flight-window size
no pppoe in-flight-window
Syntax Description
size
Command Default
None
Command Modes
Global Configuration
Command History
Release
Release 4.3.1
Usage Guidelines
The recommended in-flight-window size for RP-based subscribers is 200, and that for LC-based subscribers
is 50. Values higher than these are not recommended for production deployment, as it can lead to system
instability.
Task ID
Task ID
ppp
Examples This example shows how to configure the in-flight-window size for PPPoE sessions in BNG:
RP/0/RSP0/CPU0:router(config)# pppoe in-flight-window 200
Related Commands
Command
pppoe sessions limit, on page 457
Specifies the window-size for the number of PPPoE sessions that are in progression
towards established state in BNG.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
Description
Configures a limit for PPPoE sessions for a PPPoE BBA-Group
in BNG.
pppoe in-flight-window
5.2.x
455