Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference - Cisco ASR 9000 Series Command Reference Manual

class
The class submode is present in both DHCP IPv6 proxy profile configuration and DHCP IPv6 server profile
configuration submodes. A class is associated with a match criterion, which is used to determine if the class
is applied to a subscriber or not. The class name needs to be unique for the system.
The address-pool, dns-server, domain-name, and prefix-pool keywords appear only in the DHCP IPv6
Note
server profile configuration mode. However, the helper-address keywords appears in both DHCP IPv4
proxy profile configuration and DHCP IPv6 proxy profile configuration modes.
Task ID
Task ID
ip-services
Examples This example shows how to create a class in the DHCP IPv4 proxy profile configuration mode:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile dhcp_profile proxy
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)# class blue
This example shows how to create a class in the DHCP IPv6 proxy profile configuration mode:
RP/0/RSP0/CPU0:router(config)# dhcp ipv6
RP/0/RSP0/CPU0:router(config-dhcpv6)# profile dhcp_profile1 proxy
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)# class blue
This example shows how to create a class in the DHCP IPv6 server profile configuration mode:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv6)# profile dhcp_profile2 server
RP/0/RSP0/CPU0:router(config-dhcpv4-server-profile)# class red
Related Commands
Command
class-map type control subscriber, on page 120

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x
146
Operation
read, write
Description
This topic describes the class-map type control subscriber
command.
BNG DHCP Commands