Show Dhcp Ipv6 Proxy Interface (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

show dhcp ipv6 proxy interface (BNG)

To display the proxy interface information for Dynamic Host Configuration Protocol (DHCP), use the show
dhcp ipv6 proxy interface command in EXEC mode.
show dhcp ipv6 proxy interface{type| interface-path-id} {location| location}
Syntax Description
type
interface-path-id
location
location
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.3.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
ip-services
Examples This is a sample output from the show dhcp ipv6 proxy interface command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 proxy interface
Tue Sep
Interface type. For more information, use the question mark (?) online help function.
Physical interface or virtual interface.
Note Use the show interfaces command to see a list of all interfaces currently
configured on the router.
For more information about the syntax for the router, use the question mark ( ? )
online help function.
Displays the node location by Interface.
Displays the fully qualified location specification of an interface.
4 19:14:54.056 UTC
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
show dhcp ipv6 proxy interface (BNG)
Modification
This command was introduced.
Operation
read
5.2.x
207