Aaa Accounting System Rp-Failover - Cisco ASR 9000 Series Command Reference Manual

BNG AAA Commands

aaa accounting system rp-failover

To create an accounting list to send rp-failover or rp-switchover start or stop accounting messages, use the
aaa accounting system rp-failover command in Global Configuration mode. To disable the system accounting
for rp-failover, use the no form of this command.
aaa accounting system rp-failover {list_name {start-stop| stop-only}| default {start-stop| stop-only}}
no aaa accounting system rp-failover {list_name {start-stop| stop-only}| default {start-stop| stop-only}}
Syntax Description
list_name
default
start-stop
stop-only
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
aaa
Examples This is an example of configuring the aaa accounting system rp-failover command for default accounting
list:
RP/0/RSP0/CPU0:router(config)# aaa accounting system rp-failover default start-stop none
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
aaa accounting system rp-failover
Specifies the accounting list name.
Specifies the default accounting list.
Enables the start and stop records.
Enables the stop records only.
Modification
This command was introduced.
Operation
read, write
5.2.x
7