Show Dhcp Ipv4 Proxy Interface (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

show dhcp ipv4 proxy interface (BNG)

To display the proxy interface information for Dynamic Host Configuration Protocol (DHCP) IPv4, use the
show dhcp ipv4 proxy interface command in EXEC mode.
show dhcp ipv4 proxy interface [interface-type interface-name] [detail]
Syntax Description
interface-type
interface-name
detail
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
ip-services
Examples This is a sample output from the show dhcp ipv4 proxy interface command:
RP/0/RSP0/CPU0:router# show dhcp ipv4 proxy interface bundle-Ether 70.16 detail
Sat Jan
Interface:
VRF:
Mode:
Profile Name:
Lease Limit:
Lease Count Details:
Circuit id from AAA
c2
5 14:25:53.484 UTC
Bundle-Ether70.16
default
Proxy
proxy1
per circuit id from AAA 2
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Type of the proxy interface.
Name of the proxy interface.
Displays the detailed information of proxy interface.
Modification
This command was supported for BNG.
Operation
read
show dhcp ipv4 proxy interface (BNG)
Count
1
5.2.x
199