Radius-Server Load-Balance - Cisco ASR 9000 Series Command Reference Manual

radius-server load-balance

radius-server load-balance
To configure the RADIUS load-balancing options, use the radius-server load-balance command in the
Global Configuration mode. To disable the Radius server load-balance, use the no form of this command.
radius-server load-balance method least-outstanding [batch-size value| ignore-preferred-server]
no radius-server load-balance method least-outstanding
Syntax Description
method
least-outstanding
batch-size
value
ignore-preferred-server
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
aaa
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
44
Specifies the method by which the next host will be picked.
Picks the server with the least transactions outstanding.
Specifies the batch size for the selection of the server.
Specifies the batch size value. The value ranges from 1 to 1500. The
default is 25.
Disables the preferred server for this server group.
Modification
This command was introduced.
Operations
read, write
BNG AAA Commands