Show Pppoe Statistics - Cisco ASR 9000 Series Command Reference Manual

show pppoe statistics

show pppoe statistics
To show the counters for packets received and sent by the PPPoE sessions, use the show pppoe statistics
command in the EXEC mode mode.
show pppoe statistics {access-interface| type| interface-path-id| internal | { location| node}| location| node}
Syntax Description
access-interface
type
interface-path-id
internal
location
node
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
Task ID
ppp
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
470
Shows PPPoE status for all sessions on a single access interface.
Interface type. For more information, use the question mark (?) online help
function.
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
Note
currently configured on the router.
For more information about the syntax for the router, use the question mark
(?) online help function.
Shows internal PPPoE statistics.
Shows PPPoE status for all sessions at a location.
Specifies the fully qualified location specification.
Modification
This command was introduced.
Operation
read
PPPoE Commands