Match Vrf - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

match vrf

To match class based on VRF name, use the match vrf command in the DHCP IPv4 proxy profile class
configuration mode. To disable the match vrf, use the no form of the command.
match vrf vrf_name
no match vrf vrf_name
Syntax Description
vrf_name
Command Default
None
Command Modes
DHCP IPv4 proxy profile class configuration
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples This is an example of configuring the match vrf command
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile dhcp_profile proxy
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)# class blue
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile-class)# match vrf vrf1
Related Commands
Command
match option, on page 175
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Specifies the VRF name.
Modification
This command was introduced.
Operation
read, write
Description
Matches the proxy with the configured pattern.
match vrf
5.2.x
177