Show Dhcp Ipv6 Proxy Binding (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

show dhcp ipv6 proxy binding (BNG)

To display the client bindings for Dynamic Host Configuration Protocol (DHCP) proxy, use the show dhcp
ipv6 proxy binding command in EXEC mode.
show dhcp ipv6 proxy binding{detail| duid| interface| interface-id| location| mac-address| remote-id|
summary| vrf}
Syntax Description
detail
duid
interface
interface-id
location
mac-address
remote-id
summary
vrf
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.1.1
Release 4.3.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
ip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Displays detailed bindings for proxy.
Displays client bindings for DUID.
Displays client bindings by Interface.
Displays client bindings by Interface ID.
Specifies the node location.
Displays detailed client binding information.
Displays client binding by Remote ID.
Displays summary bindings for proxy.
Displays client bindings by VRF name.
Modification
This command was introduced.
This command was supported for BNG.
Operation
read
show dhcp ipv6 proxy binding (BNG)
5.2.x
205